Liquid Solutions Sealers and Polymers
UKCP AcryMul50 is an APEO free pure acrylic copolymer emulsion with 50% solids. It is a multipurpose binder for interior and exterior coatings and water and damp proofing, with low VOC, scrub resistance, efflorescence resistance and high gloss.
UKCP AcryMul50 is an APEO free pure acrylic copolymer emulsion. Its typical properties are low VOC, scrub resistance, efflorescence resistance and high gloss, and it has typical solids of 50%.
APEO free means the emulsion is made without alkylphenol ethoxylates, a group of surfactants that some users prefer to avoid. Solids is the proportion of the emulsion that remains as polymer once the water has gone. MFFT, the minimum film forming temperature, is the lowest temperature at which an emulsion can form a continuous film as it dries. Scrub resistance describes how well a dried coating stands up to repeated washing or abrasion.
Typical applications for AcryMul50 are:
For a lower viscosity acrylic sealer designed for concrete blocks, bricks and roof tiles, look at BlokSeal.
Stir the product before use. For application instructions and addition rates in your formulation, talk to our technical support team. Confirm performance with your own trials before production.
For health and safety information, please refer to the Safety Data Sheet, available on request.
AcryMul50 is supplied in 1000kg IBCs and in bulk. Store it at a temperature between +5°C and +25°C, avoiding frost and direct sunlight, and stir before use. If stored according to these conditions and in the original unopened containers, the dispersion will be stable for 12 months following delivery. Use the product as soon as possible after opening.
Need a binder for a coating or damp proofing product? Talk to our technical support team, or request a sample to trial AcryMul50.
Common questions about AcryMul50. For project specific advice, contact our technical team.
Liquid Sealers and Polymers
BlokSeal is a surface sealer and efflorescence reducer for the protection of concrete blocks and bricks. It is a low viscosity, water based, APEO free core-shell pure acrylic copolymer emulsion with high exterior durability and low VOC, applied neat or diluted by brush, roller or low pressure spray.
View product
Liquid Screed Admixtures
LSA Max is a liquid admixture for semi-dry screeds, developed to give very rapid drying times, high early strength and foot traffic after 24 hours. It produces a Cat A, C40, F7 screed with compressive strengths of up to 60 N/mm².
View product
Liquid Mortar Admixtures
Liquid AEA is a liquid air entraining admixture for mortars, dosed with the mixing water. As an air entrainer, it is designed to stabilise very small air bubbles in the mix, which typically improves workability and cohesion. Results depend on the mix, so trial it with your own materials.
View productFurther reading from the UKCP team, starting with guidance on AcryMul50.
Product News
LSA Max is UKCP's liquid admixture for semi-dry screeds, developed to deliver very rapid drying, high early strength and foot traffic after 24 hours.
Read more
Industry Insight
A screed admixture changes how a sand and cement screed mixes, finishes, gains strength and dries. This guide explains how to match the right admixture to your project.
Read more
Company News
UKCP develops bespoke black box additive packages in powder or liquid form, built around the raw materials already used on a manufacturer's own production site.
Read moreOur team is here to help you choose the perfect product for your project.
