Product collection
UKCP liquid solutions are admixtures, release agents, plant care products and acrylic emulsions for readymix and precast concrete, screeds and mortars. The range includes superplasticisers, accelerators, compaction aids, mould release agents, concrete remover and sealers.
There are 14 products in this collection. Select a product for full details, technical data and its downloadable datasheet.
Liquid Screed Admixtures
LSA Max is a liquid admixture for semi-dry screeds, developed to give very rapid drying times, high early strength and foot traffic after 24 hours. It produces a Cat A, C40, F7 screed with compressive strengths of up to 60 N/mm².
View product
Liquid Mortar Admixtures
Liquid AEA is a liquid air entraining admixture for mortars, dosed with the mixing water. As an air entrainer, it is designed to stabilise very small air bubbles in the mix, which typically improves workability and cohesion. Results depend on the mix, so trial it with your own materials.
View product
Liquid Concrete Admixtures
SP10 is a mid range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 10%, helps prevent bleeding and segregation, and is an economic plasticiser for readymix concrete and screeds.
View product
Liquid Concrete Admixtures
SP20 is a high range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 20% and suits self levelling, self-compacting and low water to cement ratio precast concretes, as well as mortars, adhesives and grouts.
View product
Liquid Concrete Admixtures
HP-Xcel is a chloride free concrete accelerator and low temperature plasticiser. This non-chloride, non-corrosive liquid hardening accelerator speeds cement hydration for faster setting and higher early strength, and helps provide safer winter concreting without delays.
View product
Liquid Precast Admixtures
UKCP CompaktAid is a precast block compaction and processing aid for dry and semi-dry concrete. It improves compaction, density and pigment dispersion, giving better colour intensity, a better surface finish and reduced efflorescence in blocks, paving flags and block paviours.
View product
Liquid Precast Admixtures
UKCP CompaktAid Plus is a high performance semi-dry precast compaction and processing aid. It combines improved compaction with better cement dispersion to help improve early strengths, and offers binder reduction and reduced efflorescence in blocks, paving and roof tiles.
View product
Liquid Release Agents and Plant Care
Eco-lease RB is a maximum concentration, 100% biodegradable mould release agent made from natural vegetable oils and naturally occurring polymeric extracts. It gives easy formwork release and uniform, stain-free concrete surfaces on site and in the precast yard.
View product
Liquid Release Agents and Plant Care
MRA EF is a maximum concentration, 100% biodegradable mould release agent blended from natural vegetable oils and naturally occurring polymeric extracts. It gives easy formwork release and a clean, uniform, non-stained concrete surface for site and precast yard use.
View product
Liquid Release Agents and Plant Care
UKCP MRA1 is a maximum concentration, low to medium viscosity mould release oil formulated for easy release of plastic and thermoplastic mould liners. It gives a high quality surface finish, is suitable for all types of formwork and offers corrosion protection to metal surfaces.
View product
Liquid Release Agents and Plant Care
Protekt is an environmentally safe, fully biodegradable protective compound for plant and equipment. A blend of fatty acids in a vegetable oil base, it forms a barrier that prevents concrete build up on plant and machinery and avoids the need for corrosive acid based cleaners.
View product
Liquid Release Agents and Plant Care
Concremove is a concrete remover for plant and tools, developed to replace highly corrosive mineral acids. It cleans away dry hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding them.
View product
Liquid Sealers and Polymers
BlokSeal is a surface sealer and efflorescence reducer for the protection of concrete blocks and bricks. It is a low viscosity, water based, APEO free core-shell pure acrylic copolymer emulsion with high exterior durability and low VOC, applied neat or diluted by brush, roller or low pressure spray.
View product
Liquid Sealers and Polymers
UKCP AcryMul50 is an APEO free pure acrylic copolymer emulsion with 50% solids. It is a multipurpose binder for interior and exterior coatings and water and damp proofing, with low VOC, scrub resistance, efflorescence resistance and high gloss.
View productDownload the datasheets for all 14 liquid products, or request a sample to try on your next job.
UKCP liquid solutions cover the admixtures dosed into the mix and the products used around it, on moulds, plant and finished units, all backed by our in-house technical support.
Concrete admixtures
Precast admixtures
Screed and mortar admixtures
Release agents and plant care
Sealers and polymers
Liquid admixtures are added with the gauging water, so they disperse quickly and evenly through the mix. They suit batching plants and precast lines with liquid dosing equipment, and larger users can take many products in 1000 litre IBCs to reduce handling.
If you need an additive built into a dry product, see our powder solutions.
Getting the best from an admixture depends on your cement, aggregates, equipment and conditions. Our technical support team can advise on dosage, mix design and application, and the technical datasheets summarise each product.
UKCP has over 30 years' technical experience developing additives and admixtures for dry mortars, silo mortars and concrete applications. Where a standard product is not the right fit, our in-house development team can create bespoke "black box" additives in liquid or powder form. To try a product with your own materials, request a sample.
Answers to common questions about this collection. For advice on a specific mix or project, contact our technical team.
12 products
2 products
3 products
4 products
4 products
3 products
3 products
5 products
2 products
Our team is here to help you choose the perfect product for your project.
