Resources
A UKCP technical datasheet is a free PDF that sets out what each product is, where to use it, its key technical data, packaging and storage. Search or filter below to find and download the datasheet you need.
Liquid Screed Admixtures
LSA Max is a liquid admixture for semi-dry screeds, developed to give very rapid drying times, high early strength and foot traffic after 24 hours. It produces a Cat A, C40, F7 screed with compressive strengths of up to 60 N/mm².
Liquid Mortar Admixtures
Liquid AEA is a liquid air entraining admixture for mortars, dosed with the mixing water. As an air entrainer, it is designed to stabilise very small air bubbles in the mix, which typically improves workability and cohesion. Results depend on the mix, so trial it with your own materials.
Liquid Concrete Admixtures
SP10 is a mid range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 10%, helps prevent bleeding and segregation, and is an economic plasticiser for readymix concrete and screeds.
Liquid Concrete Admixtures
SP20 is a high range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 20% and suits self levelling, self-compacting and low water to cement ratio precast concretes, as well as mortars, adhesives and grouts.
Liquid Concrete Admixtures
HP-Xcel is a chloride free concrete accelerator and low temperature plasticiser. This non-chloride, non-corrosive liquid hardening accelerator speeds cement hydration for faster setting and higher early strength, and helps provide safer winter concreting without delays.
Liquid Precast Admixtures
UKCP CompaktAid is a precast block compaction and processing aid for dry and semi-dry concrete. It improves compaction, density and pigment dispersion, giving better colour intensity, a better surface finish and reduced efflorescence in blocks, paving flags and block paviours.
Liquid Precast Admixtures
UKCP CompaktAid Plus is a high performance semi-dry precast compaction and processing aid. It combines improved compaction with better cement dispersion to help improve early strengths, and offers binder reduction and reduced efflorescence in blocks, paving and roof tiles.
Liquid Release Agents and Plant Care
Eco-lease RB is a maximum concentration, 100% biodegradable mould release agent made from natural vegetable oils and naturally occurring polymeric extracts. It gives easy formwork release and uniform, stain-free concrete surfaces on site and in the precast yard.
Liquid Release Agents and Plant Care
MRA EF is a maximum concentration, 100% biodegradable mould release agent blended from natural vegetable oils and naturally occurring polymeric extracts. It gives easy formwork release and a clean, uniform, non-stained concrete surface for site and precast yard use.
Liquid Release Agents and Plant Care
UKCP MRA1 is a maximum concentration, low to medium viscosity mould release oil formulated for easy release of plastic and thermoplastic mould liners. It gives a high quality surface finish, is suitable for all types of formwork and offers corrosion protection to metal surfaces.
Liquid Release Agents and Plant Care
Protekt is an environmentally safe, fully biodegradable protective compound for plant and equipment. A blend of fatty acids in a vegetable oil base, it forms a barrier that prevents concrete build up on plant and machinery and avoids the need for corrosive acid based cleaners.
Liquid Release Agents and Plant Care
Concremove is a concrete remover for plant and tools, developed to replace highly corrosive mineral acids. It cleans away dry hardened concrete, efflorescence and tar deposits from most surfaces without damaging or corroding them.
Liquid Sealers and Polymers
BlokSeal is a surface sealer and efflorescence reducer for the protection of concrete blocks and bricks. It is a low viscosity, water based, APEO free core-shell pure acrylic copolymer emulsion with high exterior durability and low VOC, applied neat or diluted by brush, roller or low pressure spray.
Liquid Sealers and Polymers
UKCP AcryMul50 is an APEO free pure acrylic copolymer emulsion with 50% solids. It is a multipurpose binder for interior and exterior coatings and water and damp proofing, with low VOC, scrub resistance, efflorescence resistance and high gloss.
Each technical datasheet is an A4 PDF written for contractors, specifiers and merchants. It covers:
Datasheets are a guide. Always check the latest version before use, and carry out site trials where appropriate.
Safety Data Sheets (SDS) are available on request for every UKCP product. Contact us with the product name to request the current version.
Request a Safety Data SheetOur technical team can help with mix design, application advice and product selection for your project.
Get technical supportOur team is here to help you choose the perfect product for your project.
