Liquid Solutions Concrete Admixtures
SP10 is a mid range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 10%, helps prevent bleeding and segregation, and is an economic plasticiser for readymix concrete and screeds.
SP10 is a mid range water reducing superplasticiser liquid. It is an extremely high efficiency anionic superplasticiser based on polycarboxylate technology, and its key function is as an economic mid range water reducer.
SP10 has a very high deflocculation effect. Deflocculation means keeping cement particles separated rather than clumped together, and SP10 maintains this dispersed state for longer periods than conventional plasticisers. The result is high water reduction of more than 10%, very high early and final strength, and a mix that resists bleeding and segregation.
Polycarboxylate ethers are a modern family of superplasticisers. In general terms, they attach to cement particles and push them apart, so a concrete can reach the same workability with less water, or greater workability at the same water content.
SP10 has applications in screeds and concretes, including:
For higher water reduction, or for self levelling, self-compacting and low water to cement ratio precast concretes, look at SP20.
Typical dosage rates are in the order of 0.5% to 0.9% by weight of cement. This is a guide only. Evaluation trials are recommended to establish the optimum dosage for your materials, so confirm your dose with trials and with our technical support team.
SP10 should be handled in accordance with good industrial practice. Please refer to the Safety Data Sheet, available on request.
SP10 should be stored correctly in a dry environment between 5°C and 35°C. It has a shelf life of 2 years when stored correctly. For current pack sizes and delivery options, please contact UKCP.
Need help with dosage or mix design? Talk to our technical support team, or request a sample to trial SP10 with your own materials.
Common questions about SP10. For project specific advice, contact our technical team.
Liquid Concrete Admixtures
SP20 is a high range water reducing superplasticiser liquid based on polycarboxylate technology. It gives water reduction of more than 20% and suits self levelling, self-compacting and low water to cement ratio precast concretes, as well as mortars, adhesives and grouts.
View product
Liquid Concrete Admixtures
HP-Xcel is a chloride free concrete accelerator and low temperature plasticiser. This non-chloride, non-corrosive liquid hardening accelerator speeds cement hydration for faster setting and higher early strength, and helps provide safer winter concreting without delays.
View product
Powder Concrete Admixtures
UKCP Rapid Set is a highly active, rapid set, high early strength cement additive for Portland cement systems. It accelerates precast and ready mixed concrete and activates GGBS, allowing 75% cement replacement without compromising early strength development.
View productFurther reading from the UKCP team, starting with guidance on SP10.
Product News
LSA Max is UKCP's liquid admixture for semi-dry screeds, developed to deliver very rapid drying, high early strength and foot traffic after 24 hours.
Read more
Industry Insight
A screed admixture changes how a sand and cement screed mixes, finishes, gains strength and dries. This guide explains how to match the right admixture to your project.
Read more
Company News
UKCP develops bespoke black box additive packages in powder or liquid form, built around the raw materials already used on a manufacturer's own production site.
Read moreOur team is here to help you choose the perfect product for your project.
